VUDOO V-22 Barrel Actions £2250

Our V22 barrelled action is built like no other! The ability for a 22LR or 17HM2 repeater to drop into any Remington 700 short action footprint hasn’t been available…..until now! This gives you, our customer, great flexibility in tapping into the vast aftermarket that exists around the Remington 700 platform. Our patented V22 action is hand-fitted to a precision manufactured, hand lapped, single-point-cut rifle barrel. For more details on the V-22 Action please click here. Each Barrelled Action comes with the following: -Available in either 22LR.

£TBA 

 17HM2, .22WMR, 17HMR
-Rail in 0, 20, 30, 40, or 60 MOA
-1 magazine
-Threaded bolt with bolt knob
-Threaded muzzle 1/2 X 28 TPI
-Cerakote action
-Cerakoted barreled action in Graphite Black, Mil-Spec Green, FDE, Cobalt, Burnt Bronze, Sniper Gray, and our custom Vudoo Green (custom colors can be done for an additional cost)
-Comes with trigger pins, but no trigger is included in the cost
-Available as either left- or right-handed 

Want more details?

Well, first off, it departs from the 40X in that the 40X was a full-size centre fire receiver converted to handle the diminutive .22LR cartridge. The V-22 repeater has been designed from the ground up as a true-to-scale Rimfire receiver that fits the Rem 700 footprint as far as stocks and chassis’ go. It also runs a full size short action bottom metal (DBM) and our V-2210 magazine has an AICS form factor, so it pops right in Chassis’ or other DBM’s made for such. The V-22 repeater has a very unique control-round-feed protocol. The bolt has full capture control of the cartridge from the time it leaves the magazine until it ejects the spent round out the ejection port. The significance of that is two-fold. Great feed and extraction reliability and…equally as important, the cartridge is controlled in a way that it never touches anything on its entrance into the bore. There is no feed ramp, nor does the projectile go in at an angle that would damage it in any way. We all know how susceptible the soft lead of the .22LR is to accuracy degrading damage and minor nicks during the chambering process. It is eliminated in the V-22 repeater geometry. We are also very proud to offer our V-22 Action in both left- and right-handed models for .22 LR and .17 Mach 2 as well as a Magnum action for .22 WMR and .17 HMR.
Some may say its overkill to build a rimfire action to this level. Heck, most production center fire rifles don’t have a solid one piece bolt handle integral with the bolt body or an integral recoil lug like the V-22 does. We say if you want extreme reliability and accuracy in a repeater, there is no such thing as overkill.
Many great designs are conceived and exist out there in the world but the truly great ones are manufacturable on a large scale, repeatable, high tolerance level. The V-22 based family of actions are such a design. Our ability to hold tolerances in the tenths of thousandths with a consistent repeatability while still producing a volume suitable to meet demand is testament to the inherent design characteristics Mike laid out at the very beginning. This ensures you, our valued customer, can count on the same quality in the ten thousandth rifle as came in the first.
All steps in our manufacturing process are done on state-of-the-art CNC equipment whether it is the creation of the receiver, bolt, barrel chambering or the little things like the pinned scope rail and threaded oversize bolt knob. Precision manufacturing exudes from every nook and cranny of this thing. It really is that awesome.
Couple all that precision manufacturing with an assembly build process handled by some of the most skilled craftsmen out there, all shooters themselves with a passion for perfection, and you have what is arguably one of the finest rifles built. It just happens to shoot some of the most fun cartridges there are…rimfire!